Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
221
Enabling 802.1x Port-based Authentication on the Switch
To enable the 802.1x port-based Authentication feature on a switch, do
the following:
1. Select the Security tab.
The Security tab is displayed. See Figure 69 on page 194.
2. From the Security tab, select 802.1x Port Authentication.
The 802.1x Authentication page is displayed. See Figure 80.
Figure 80. 802.1x Authentication Page
3. Use the pull-down menu next to the Status field to select “Enabled.”
The default setting is “Disabled.”
4. Click Apply.
5. Click SAVE
to save your changes to the startup configuration file.