Filter
Top Products
Chapter 23: Setting Dynamic Routes Using RIP
282
The following fields are displayed:
VLAN— Indicates the ID number of the VLAN. This VLAN
interface receives and sends RIP packets and the network that the
VLAN belongs to is advertised through RIP.
IP Interface— Indicates the IP address that the VLAN interface is
assigned to.
Authentication Type— Indicates the ID number of the VLAN
where the host is a member.
Authentication Key— Indicates the port number where the host is
connected.
Send— Indicates the RIP version number of the packets that the
VLAN interface is specified to send.
Receive— Indicates the RIP version number of the packets that
the VLAN interface is specified to receive.
Metric— Indicates the number of routing devices that a packet
must travel to reach the destination.
Status— Indicates the status of the VLAN interface.