Filter
Top Products
Chapter 13: Internet Group Management Protocol (IGMP) Snooping
168
Displaying the Hosts List
To display the IGMP Hosts List, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 57 on page 161.
2. Select IGMP and then move the cursor to the right to select IGMP
Snooping.
The IGMP Snooping page is displayed with the Configuration tab
selected by default. See Figure 58 on page 162.
3. Click the Hosts List tab.
The Hosts List page is displayed. See Figure 60.
Figure 60. IGMP Snooping Page with Hosts List Tab
The following settings are displayed:
Group Address— Indicates the multicast address of the group.
VLAN ID— Indicates the VLAN ID of the host node.
Port ID— Indicates the port of the host node. If the host node is on
a port trunk, this field displays the trunk ID number instead of the
port number.
Host IP— Indicates the IP address of the host node.