Filter
Top Products
Chapter 1: AlliedWare Plus™ Version 2.2.4 Web Browser Interface
20
Management Sessions
The AT-8100 series switches provide two management interfaces: the
AlliedWare Plus™ Web interface and Command Line Interface (CLI). This
manual provides procedures that guide you through the AlliedWare Plus™
Web interface.
The initial management session of the switch can be from a management
session either through the Web interface or the CLI. The switch is shipped
from the factory with an IP address assigned and the Web interface (HTTP
service) enabled so that you can start the initial management session
through the Web interface. To start the initial web management session,
see Chapter 2, “Starting a Management Session” on page 23.
The web interface allows access to a subset of the AlliedWare Plus
features. For access to all of the AlliedWare Plus features, you must use
the CLI.
Detailed feature descriptions are not provided in this guide. For thorough
explanations of the features, see the AlliedWare Plus Management
Software Version 2.2.4 Command Line Interface User’s Guide.