Filter
Top Products
Chapter 23: Setting Dynamic Routes Using RIP
284
Figure 116. RIP Interface Page
3. Specify the following fields as needed:
VLAN Interface— Select the VLAN interface to associate with the
RIP routing process. This VLAN interface receives and sends RIP
packets and the network where the VLAN belongs is advertised
through RIP.
Authentication Mode— Select the authentication mode for the
VLAN interface. Choose MD5, Text, or None.
Authentication Key— Enter the authentication password that the
VLAN interface uses to authenticate the RIP packets. The
authentication password can be up to sixteen alphanumeric
characters. It is case-sensitive and can include spaces.
Send Type— Select the RIP version of packets that the VLAN
interface sends. Choose RIP1 or RIP2.
Receive Type— Select the RIP version of packets that the VLAN
interface receives. Choose RIP1, RIP2, or Both.
Default Metric— Select the Default Metric value. Choose a
number from 1 to 16.