Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
337
Displaying Port
Locations
To display the LLDP port locations, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab appears on the right.
3. From the LLDP tab, select Port Locations.
The LLDP Port Location page is displayed. See Figure 137 on page
322.
The following fields are displayed.
Interface— Indicates the port ID.
Civic Location ID— Indicates the Civic location ID.
Coordinate Location ID— Indicates the coordinate location ID.
ELIN Location ID— Indicates the ELIN location ID.
Displaying LLDP
TLV
To display the LLDP TLV settings, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab is displayed.
3. From the LLDP tab, select TLV.
The LLDP TLV tab is displayed in Figure 127 on page 308.
4. From the LLDP TLV tab, select TLV again.
The LLDP TLV page is displayed. See Figure 128 on page 309.
The following fields are displayed:
Interface— Indicates the port ID.
Port Description— Indicates the port description of the neighbor’s
port.
System Name— Indicates the neighbor’s system name.
System Description— Indicates the model number of the
AT-8100 switch.