Filter
Top Products
Chapter 10: Setting Static Port Trunks
134
Modifying the Static Trunk Settings
Review the following information if you are adding ports to an existing
trunk:
The ports of a static trunk must be members of the same VLAN.
If the new port added to a trunk is already a member of another static
trunk, you must first remove it from its current trunk assignment.
To add or remove member ports from a static port trunk, or modify the load
balance method, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select Link Aggregation.
For an example of the Link Aggregation selection, see Figure 47 on
page 129.
3. Move the cursor to the right and select Static Trunks.
The Static Trunks page is displayed. See Figure 48 on page 129.
4. From the Static Trunks page, click Edit
.
The Modify Static Trunk page is displayed. See Figure 50 on page
135.