Filter
Top Products
Chapter 11: Setting Port-based and Tagged VLANs
142
Displaying VLANs
To display the VLAN assignments for all of the switch ports, do the
following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select VLANs.
The VLANs page is displayed. For an example of the VLANs page,
see Figure 51.
Figure 51. VLANs Page
The following fields are displayed:
Vlan ID— Indicates a VLAN identifier. The range is 1 to 4094. The
VID of 1 is the default VLAN.
Name— Indicates a name of a VLAN.
Untagged Member Ports— Indicates untagged ports that belong
to the VLAN.
Tagged Member Ports— Indicates tagged ports that belong to the
VLAN.
Note
By default, there is one VLAN configured. This is the default VLAN
with a Vlan ID of 1. All ports on the switch are assigned to the default
VLAN. All ports in Vlan ID 1 are untagged by default.