Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
231
IP Management
Guidelines
See the following list for guidelines about assigning a management IPv4 or
IPv6 address to the switch:
You can assign one IPv4 address per VLAN.
Any IPv4 address can be used as the management IP address.
The switch can have only one IPv6 address.
The management IPv4 address can be any IPv4 address assigned to
a VLAN on the switch. For background information on VLANs, see
Chapter 11, “Setting Port-based and Tagged VLANs” on page 139.
In the AlliedWare Plus™ Version 2.2.4 Web interface, the IPv4 address
is assigned as the static address. The Web interface does not support
the assignment of an IPv4 address from a DHCP server. When you
want to assign an IPv4 address from a DHCP server, see the
AlliedWare Plus Management Software Version 2.2.4 Command Line
Interface User’s Guide.
An IPv6 address is assigned as the static address. The switch does
not support the assignment of an IPv6 address from a DHCP server.
To assign the default gateway IPv4 address, you must assign it as the
static route. For assigning a static route, see Chapter 21, “Setting
Static Routes” on page 259.
To assign the default gateway IPv6 address, you must add it when you
assign the management IPv6 address. See Chapter 19, “Adding an
IPv6 Address” on page 241.
The IPv4 management address and the default gateway IPv4 address
must be members of the same network.
The IPv6 management address and the default gateway IPv6 address
must be members of the same network.
HTTP client Used for a Web browser to
bring the AT-8100 Web
interface on your network.
yes yes
Table 7. Web Interface Features that Require an IP Management Address (Continued)
Feature Description
Supported by
IPv4 Address
Supported by
IPv6 Address