Filter
Top Products
Chapter 17: RADIUS and TACACS+ Clients
208
Configuring TACACS+ for Remote Manager Authentication
To configure remote manager authentication using TACACS+ and add
TACACS+ servers to the switch, perform the following:
“Configuring Remote Manager Authentication Using TACACS+” on
page 208
“Adding a TACACS+ Server” on page 211
Configuring
Remote Manager
Authentication
Using TACACS+
To configure a TACACS+ server, do the following:
1. Select the Security tab.
The Security tab is displayed. See Figure 69 on page 194.
2. From the Security tab, select Authentication Servers.
The Authentication Server Configuration page is displayed. See Figure
72 on page 204.
3. Click the TACACS+ tab.
The Authentication Server Configuration Page with the TACACS+ tab
is displayed. See Figure 74 on page 209.