Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
95
Assigning a Destination Port
You must assign the destination port before adding source ports. Also, you
are allowed to assign only one destination port to the switch.
To assign a destination port, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select Port.
The Port tab is displayed.
3. From the Port tab, select Mirroring.
The Port Mirroring List page is displayed. See Figure 34 on page 93.
4. Select the pull-down menu next to the Destination Port field at the top
of the page.
5. Click on the port that you want to designate as the destination port.
You can only assign one destination port to a switch.
6. Click Apply.
The Edit option is removed from the port. This indicates the
destination port for the switch.
7. Click SAVE
to save your changes to the startup configuration file.