Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
295
Adding a Static ARP Entry
To add a static ARP entry, do the following:
1. Select the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 120 on page 293.
2. From the Layer 3 tab, select ARP Table.
The ARP table is displayed. See Figure 121 on page 293.
3. Click Add
.
The Add Static ARP Page is displayed. See Figure 122.
Figure 122. Add Static ARP Page
4. Enter the following settings:
IP Address— Enter the IPv4 address of the host to create an ARP
entry.
MAC Address— Enter the MAC address that is associated to the
IP address.
VLAN— Select a VLAN that the port belong to. The port is where
the host is connected.