Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
303
Figure 124. LLDP Configuration Page
4. Change the following fields as needed:
Status— Enable LLDP on the switch. By default, LLDP is disabled.
Timer— Enter the transmit interval of LLDP advertisements. The
transmit interval must be at least four times the transmission delay
timer (Tx Delay). The range is 5 to 32,768 seconds. The default
value is 30 seconds.
Fast Start Count— Enter a fast start count for LLDP-MED. The
fast start count determines how many fast start advertisements
LLDP sends from the port when it begins sending LLDP-MED