Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
185
Figure 67. PoE Port List Page
The following fields are displayed:
Status— Enable or disable PoE on the ports globally. By default,
PoE is enabled on all ports.
Note
This status does not indicate that the PoE status of all the ports is
the same. To find out the PoE status, you must examine the PoE
status for a port individually.
Power Usage Threshold— Indicates the power usage threshold
in a percentage of the switch’s total available power. The range is 1
to 99%.
Interface— Indicates the port ID.
Description— Indicates the description of the port.
PoE Status— Indicates if PoE for the port is enabled or disabled.
By default, PoE is enabled for all the ports on the switch.
Power Consumed— Indicates the power consumption in
milliwatts (mW) for the port.
Power Limit— Indicates the power limit in milliwatts (mW) on the
port.
Port Priority— Indicates the port priority: Low, High, or Critical.
For more details, see “Port Prioritization” on page 183.