Filter
Top Products
Chapter 17: RADIUS and TACACS+ Clients
206
None: Indicates that sending accounting messages is
disabled.
4. Click Apply.
The Active Authentication Server field shown on the upper middle of
the page indicates “RADIUS.”
5. Click SAVE
to save your changes to the startup configuration file.
Adding a
RADIUS Server
To add a RADIUS server, do the following:
6. Click Add
near the RADIUS server list.
The Authentication Server Configuration page with the RADIUS tab
selected is displayed. See Figure 73.
Figure 73. Radius Add Page
7. Enter the following fields as needed:
IP Address— Enter the IP address of a RADIUS server on the
network. The IP address must be in the following IPv4 format:
xxx.xxx.xxx.xxx.