Filter
Top Products
Chapter 25: LLDP and LLDP-MED
318
Figure 134. LLDP Coordinate Location Page— Modify
6. Specify the following fields as needed:
ID— Enter an LLDP Coordinate Location ID. The range is 1 to 256.
(This range is separate from the ranges for civic and ELIN entries.)
Latitude— Enter a latitude value in decimal degrees. The range is
-90.0º to 90.0º. The field accepts up to two digits to the right of the
decimal point.
Latitude Resolution— Enter latitude resolution as the number of
valid bits. The range is 0 to 34 bits.
Longitude— Enter a longitude value in decimal degrees. The
range is -180.0º to 180.0º. The field accepts up to two digits to the
right of the decimal point.
Longitude Resolution— Enter longitude resolution as the number
of valid bits. The range is 0 to 34 bits.