Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
123
Modifying an LACP Trunk
To modify the LACP Trunk settings, see the following procedure:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select Link Aggregation.
For an example of the Link Aggregation selection, see Figure 43 on
page 119.
3. Move the cursor to the right and select LACP.
The LACP Trunks page is displayed. See Figure 44 on page 119.
4. From the LACP Trunks page, click Edit
next to the Aggregator ID that
you want to change.
The Modify LACP Trunk page is displayed. See Figure 46.
Figure 46. Modify LACP Trunk Page