Filter
Top Products
Chapter 11: Setting Port-based and Tagged VLANs
150
Removing an Untagged Port from a VLAN
By default, all the ports on the switch belong to the default-VLAN, VLAN1
as untagged ports. When you assign a port to another VLAN as an
untagged port, the switch removes the untagged port from the original
VLAN, and then assigns it to the new VLAN.
Caution
Modifying the VLAN membership of active ports may cause loss of
connectivity to the switch.
To remove a untagged port from the VLAN and leave the port not belong
to any VLAN, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select VLANs.
For an example of the VLANs page is displayed, see Figure 51 on
page 142.
3. From the VLANs page, click Edit
next to the VLAN that the untagged
port you want to remove is belong to.
The Modify VLAN page is displayed. See Figure 55 on page 151.