Filter
Top Products
AlliedWare Plus Version 2.2.4 Management Software Web Browser User’s Guide
59
Rebooting a Switch
Resetting the switch ends your web browser management session. To
continue managing the switch, you must login again.
Note
All unsaved changes are discarded when you reset a switch. To
save your changes to the startup configuration file, click SAVE.
To reboot a switch, perform the following procedure:
1. Select the System Tab.
The System Settings Tab is displayed. See Figure 9 on page 41.
2. From the System Settings tab, select Dashboard.
The Dashboard Page is displayed. See Figure 3 on page 28.
3. Select Reboot
at the bottom of the page.
A confirmation prompt is displayed that indicates that the connection to
the web is lost during a reboot.
4. Click OK to reset the switch or Cancel to cancel the procedure.
Note
The switch does not forward packets while it initializes the
AlliedWare Plus™ software and loads its active configuration file.
This process takes between 20 seconds to 2 minutes to complete,
depending on the number and types of commands in the
configuration file.