Filter
Top Products
Chapter 4: Setting Port Parameters
76
Displaying the Storm Control Settings
To display the storm control settings, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 24 on page 69.
2. From the Switching tab, select Port.
The Port tab expands to the right.
3. From the Port tab, select Storm Control.
The Storm Control List page is displayed. See Figure 27.
Figure 27. Storm Control List Page
The following fields are displayed:
Interface— Indicates the port ID.
Broadcast— Indicates whether the Broadcast threshold setting is
enabled or disabled.
Broadcast Level— Indicates the maximum number of ingress
packets per second of broadcast packets the port receives.
Broadcast packets that exceed the threshold are discarded by the
port. The range is 0 to 33,554,431 packets. The default is
33,554,431 packets.