Filter
Top Products
Chapter 15: Power Over Ethernet (PoE)
188
Modifying PoE Settings on a Port
To display a list of the IPv4 interfaces, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 68.
2. From the Switching tab, select PoE.
A list of PoE settings on the ports is displayed. See Figure 67 on page
185.
3. From the PoE page, click Edit
next to the port number that you want to
modify.
The following page is displayed. See Figure 68.
Figure 68. Modify Port PoE Settings Page