Filter
Top Products
3-13
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Chapter 3 Installing a Cisco MGX 8950
Installation Procedures
Attach the components to the mounting rails at the following points in the rack:
• At the front, using the front flanges on each module.
• At approximately midpoint, attach brackets to the components, and then attach the components to
mounting rails. For 23-inch racks, order the special adapter brackets from Cisco.
The mounting rail locations shown in Figure 3-5 comply with racks that require mounting on front or
middle rear, and rear mounting rails.
Figure 3-5 Mounting Rail Distances
Module
Rear rail
5.0 in.
(12.7 cm)
10.0 in. (25.4 cm)
19.86 in. (50.44 cm)
MGX 8950 Depth 24 in. (70 cm)
Allowable intermediate
rail positions
Front rail
66048