Filter
Top Products
4-13
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Chapter 4 Maintaining the Cisco MGX 8950 Switch
Remove the Center Guide Modules
Step 5 Locate the jack screw (see Figure 4-7) behind the hole in the faceplate of the center guide module. Use
a flat-blade screwdriver to loosen the jackscrew at least five complete rotations counterclockwise to
disengage the module from the card cage.
Figure 4-7 Center Guide Module Support Bracket
Step 6 Slide the center guide module carefully from the card cage.
Step 7 Repeat Step 2 through Step 6 until you have completed removing the desired number of center guide
modules.
48458
Center
guide
module
Faceplate
Support
bracket
Support
bracket
leg
Support
bracket
leg
Captive
screw
Jack
screw