Filter
Top Products
21
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
Cisco MGX 8850 (PXM45) Multiservice Switch Release 3
The product documentation for installing and operating the Cisco MGX 8850 (PXM45) Multiservice
Switch Release
3 is listed in Table 4.
Ta b l e 4 Cisco MGX 8850 (PXM45) Multiservice Switch Release 3 Documentation
Title Description
Cisco MGX 8850 (PXM45 and PXM1E) Hardware
Installation Guide, Release 3
DOC-7814250=
Describes how to install the Cisco MGX 8850 switch. This guide
explains what the switch does and covers site preparation,
grounding, safety, card installation, and cabling. The Cisco
MGX
8850 switch uses either a PXM45 or a PXM1E controller
card and provides support for both broadband and narrowband
service modules.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI
1
of the
Cisco MGX 8830, Cisco MGX 8850, and Cisco MGX 8950
switches.
Cisco MGX 8850 (PXM45) and MGX 8950 Software
Configuration Guide, Release 3
DOC-7814788=
Describes how to configure the Cisco MGX 8850 (PXM45) and the
Cisco MGX 8950 switches with a PXM45 controller to operate as
ATM edge or core switches. This guide also provides some
operation and maintenance procedures.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB
2
objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco Frame Relay Software Configuration Guide and
Command Reference for the MGX 8850 FRSM12 Card,
Release 3
DOC-7810327=
Describes how to use the high-speed Frame Relay
(FRSM-12-T3E3) commands that are available in the CLI of the
Cisco MGX 8850 (PXM45) switch.
Cisco AXSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM45) and MGX
8950, Release 3
DOC-7814257=
This guide explains how to configure the AXSM cards for
operation and contains a command reference that describes the
AXSM commands in detail. The AXSM cards covered in this
manual are the AXSM, AXSM/B, AXSM-E, and
AXSM-32-T1E1-E.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
Cisco MGX 8850 (PXM45 and PXM1E), Cisco MGX 8950, and
the Cisco BPX
8600 switches. When connected to a PNNI network,
each Cisco BPX 8600 Series Switch requires an SES
3
for PNNI
route processing.
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide, Release 3
OL-2768-01 (online only)
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850 Release 3
switch. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic Cisco
IOS configuration information.