Cisco Systems MGX 8950 Switch User Manual


 
24
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
SES PNNI Controller Release 3
The product documentation for installing and operating the Service Expansion Shelf (SES) Private
Network-to-Network Interface (PNNI) Controller Release 3 is listed in
Table 7.
Cisco MGX 8850 (PXM45) and MGX 8950 Software
Configuration Guide, Release 3
DOC-7814788=
Describes how to configure the Cisco MGX 8850 (PXM45) and the
Cisco MGX 8950 switches with a PXM45 controller to operate as
ATM edge or core switches. This guide also provides some operation
and maintenance procedures.
Cisco AXSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM45) and
MGX 8950, Release 3
DOC-7814257=
This guide explains how to configure the AXSM cards for operation
and contains a command reference that describes the AXSM
commands in detail. The AXSM cards covered in this manual are the
AXSM, AXSM/B, AXSM-E, and AXSM-32-T1E1-E.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the Cisco
MGX
8850 (PXM45 and PXM1E), Cisco MGX 8950, and the Cisco
BPX
8600 switches. When connected to a PNNI network, each Cisco
BPX
8600 Series Switch requires an SES for PNNI route processing.
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide, Release 3
OL-2768-01 (online only)
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850 switch
Release
3. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic Cisco IOS
configuration information.
Regulatory Compliance and Safety Information for
the Cisco MGX 8830, MGX 8850 (PXM45 and
PXM1E), and MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX 8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
Table 6 Cisco MGX 8950 Multiservice Switch Release 3 Documentation (continued)
Title Description
Ta b l e 7 SES PNNI Controller Release 3 Documentation
Title Description
Cisco SES PNNI Controller Software Configuration
Guide, Release 3
DOC-7814258=
Describes how to configure, operate, and maintain the SES PNNI
Controller.