Filter
Top Products
25
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
Cisco MGX 8830 Multiservice Switch Release 3
The product documentation for installing and operating the Cisco MGX 8830 Multiservice Switch
Release 3 is listed in
Table 8.
Cisco SES PNNI Controller Command Reference,
Release 3
DOC-7814260=
Provides a description of the commands used to configure and
operate the SES PNNI Controller.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
Cisco MGX 8850 (PXM45 and PXM1E), Cisco MGX 8950, and
the Cisco BPX
8600 switches. When connected to a PNNI
network, each Cisco BPX
8600 Series Switch requires an SES for
PNNI route processing.
Table 7 SES PNNI Controller Release 3 Documentation (continued)
Title Description
Ta b l e 8 Cisco MGX 8830 Multiservice Switch Release 3 Documentation
Title Description
Cisco MGX 8830 Hardware Installation Guide, Release 3
DOC-7814547=
Describes how to install the Cisco MGX 8830 edge switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8830 switch uses a PXM1E controller card and
provides PNNI support for narrowband service modules.
Cisco MGX 8850 (PXM1E) and MGX 8830 Software
Configuration Guide, Release 3
DOC-7814248=
Describes how to configure the Cisco MGX 8850 (PXM1E) and
the Cisco MGX
8830 switches with PXM1E controller cards to
operate as ATM edge switches. This guide also provides some
operation and maintenance procedures.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E), and
MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI of
the Cisco MGX 8830, Cisco MGX
8850, and Cisco MGX 8950
switches.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco AUSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and MGX
8830, Release
3
DOC-7814254=
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also provides command descriptions for all AUSM
commands.
Cisco CESM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX
8830, Release 3
DOC-7814256=
Provides software configuration procedures for provisioning
connections and managing the CESM cards supported in this
release. Also provides command descriptions for all CESM
commands.