Filter
Top Products
A-1
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
APPENDIX
A
Technical Specifications
This appendix provides the technical specifications for the Cisco MGX 8950 switch hardware
components. It contains the following sections:
• Cisco MGX 8950 System Specifications, page A-1
• AXSM Specifications, page A-2
• PXM45 Specifications, page A-3
• RPM-PR Specifications, page A-4
• RPM-XF Specifications, page A-5
Note For information on site and safety requirements, see Chapter 2, “Preparing for Installation”.
Refer to the Regulatory Compliance and Safety Information for the Cisco MGX 8830, MGX 8850
(PXM1E and PXM45), and MGX 8950 Switches document for standards and compliance information.
Cisco MGX 8950 System Specifications
Table A-1 lists the physical specifications for the Cisco MGX 8950 system.
Ta b l e A-1 Cisco MGX 8950 System Specifications
Specification Description
Dimensions
Note Racks must
have 17.75
in.
minimum
between
mounting rails.
DC-powered system 17 RUs
1
Height: 29.75 in. (71.1 cm)
Width: 19 in. (45.08 cm)
Depth: 21.5 in. (54.6 cm)—Excluding cable management and front door
AC-powered system 20 RUs
Height: 35 in. (88.9 cm)
Width: 19 in. (45.08 cm)
Depth: 21.5 in. (54.6 cm)—Excluding cable management and front door
Weight DC-powered switch
AC-powered switch
Up to 200 lb (90 kg)
Up to 300 lb (136.5 kg)