Filter
Top Products
23
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
Cisco MGX 8950 Multiservice Switch Release 3
The product documentation for installing and operating the Cisco MGX 8950 Multiservice Switch
Release 3 is listed in
Table 6.
Cisco AUSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX 8830, Release 3
DOC-7814254=
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also provides command descriptions for all AUSM
commands.
Cisco CESM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX
8830, Release 3
DOC-7814256=
Provides software configuration procedures for provisioning
connections and managing the CESM cards supported in this
release. Also provides command descriptions for all CESM
commands.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses Cisco
MGX
8850 (PXM45 and PXM1E), Cisco MGX 8950, and Cisco
BPX
8600 switches. When connected to a PNNI network, each
Cisco BPX
8600 Series Switch requires an SES for PNNI route
processing.
Cisco MGX Route Processor Module (RPM-XF)
Installation and Configuration Guide, Release 3
OL-2768-01 (online only)
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850 Release 3
switch. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic Cisco
IOS configuration information.
Cisco VISM Installation and Configuration Guide,
Release 3.0
OL-2521-01 (online only)
Describes how to install and configure VISM in the Cisco
MGX
8850 (PXM1), Cisco MGX 8250, and Cisco MGX 8230
switches. Also provides troubleshooting, maintenance, cable and
connector specifications, and Cisco CLI command configuration
information.
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX
8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
Table 5 Cisco MGX 8850 (PXM1E) Multiservice Switch Release 3 Documentation (continued)
Title Description
Ta b l e 6 Cisco MGX 8950 Multiservice Switch Release 3 Documentation
Title Description
Cisco MGX 8950 Hardware Installation Guide,
Release 3
DOC-7814147=
Describes how to install the Cisco MGX 8950 core switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8950 switch uses a PXM45/B controller card and
provides support for broadband service modules.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI of the
Cisco MGX 8830, Cisco MGX
8850, and Cisco MGX 8950 switches.