Filter
Top Products
26
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
Cisco WAN Switching Software Release 9.3
The product documentation for installing and operating the Cisco WAN Switching Software Release 9.3
is listed in
Table 9.
Cisco Frame Relay Software Configuration Guide and
Command Reference for MGX Switches (PXM1E)
DOC-7814255=
Provides software configuration procedures for provisioning
connections and managing the FRSM cards supported in this
release. Also provides command descriptions for all FRSM
commands.
Cisco VISM Installation and Configuration Guide,
Release 3.0
OL-2521-01 (online only)
Describes how to install and configure VISM in the Cisco
MGX
8850 (PXM1), Cisco MGX 8250, and Cisco MGX 8230
switches. Also provides troubleshooting, maintenance, cable and
connector specifications, and Cisco CLI command configuration
information.
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E), and
MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX 8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
Table 8 Cisco MGX 8830 Multiservice Switch Release 3 Documentation (continued)
Title Description
Ta b l e 9 Cisco WAN Switching Software Release 9.3 Documentation
Title Description
Cisco BPX 8600 Series Installation and Configuration,
Release
9.3.30
DOC-7812907=
Provides a general description and technical details of the Cisco
BPX broadband switch.
Cisco WAN Switching Command Reference, Release 9.3.30
DOC-7812906=
Provides detailed information on the general command line
interface commands.
Cisco IGX 8400 Series Installation Guide, Release 9.3.30
OL-1165-01 (online only)
Provides hardware installation and basic configuration
information for Cisco IGX 8400 Series Switches that are
running Switch Software Release 9.3.30 or earlier.
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.30
OL-1166-01 (online only)
Provides information for configuration and provisioning of
selected services for the Cisco IGX 8400 Series Switches that
are running Switch Software Release 9.3.30 or earlier.
9.3.42 Version Software Release Notes Cisco WAN
Switching System Software
OL-2911-01 (online only)
Provides new feature, upgrade, and compatibility information,
as well as known and resolved anomalies.
Cisco IGX 8400 Series Regulatory Compliance and Safety
Information
DOC-7813227=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco IGX 8400 Series Switch.