Filter
Top Products
1-28
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Chapter 1 Product Overview
System Hardware Components
MGX-XF-UI
The MGX-XF-UI is a management back card that provides remote management capabilities for the
RPM-XF through a console connection, an auxiliary connection, and two FE ports. The MGX-XF-UI is
always installed in the lower rear bay back slot directly behind the RPM-XF.
Figure 1-12 shows a close-up of the MGX-XF-UI faceplate.
Figure 1-12 MGX-XF-UI Faceplate
1 AUX—An RJ-45 receptacle that provides
connection to an auxiliary device used to
connect an external terminal for local
administrative access.
3 Status LED
• Green—The back card is active.
• Off—The back card is not detected or a
major failure has disables the back card.
2 CONSOLE—An RJ-45 receptacle that
provides a serial connection used to connect
an external terminal for local administrative
access.
4 Ethernet 0 and Ethernet 1—Two FE RJ-45
receptacles that comply with Ethernet
standards and which are used to connect the
RPM-XF to a 10/100BASE-T network
management LAN.
80746
STATUS
ETHERNET 0
L
N
K
A
C
T
MGX-XF-UI
A
U
X
C
O
N
S
O
L
E
ETHERNET 1
L
N
K
A
C
T
4
1
2
3