Filter
Top Products
22
Cisco MGX 8950 Hardware Installation Guide
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Preface
Related Documentation
Cisco MGX 8850 (PXM1E) Multiservice Switch Release 3
The product documentation for installing and operating the Cisco MGX 8850 (PXM1E) Multiservice
Switch Release
3 is listed in Table 5.
Cisco VISM Installation and Configuration Guide,
Release 3.0
OL-2521-01 (online only)
Describes how to install and configure VISM
4
in the Cisco
MGX 8850 (PXM1), Cisco MGX 8250, and Cisco MGX 8230
switches. Also provides troubleshooting, maintenance, cable and
connector specifications, and Cisco CLI command configuration
information.
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Switches
DOC-7814790=
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX
8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
1. CLI = command line interface
2. MIB = Management Information Base
3. SES = Service Expansion Shelf
4. VISM = Voice Interworking Service Module
Table 4 Cisco MGX 8850 (PXM45) Multiservice Switch Release 3 Documentation (continued)
Title Description
Ta b l e 5 Cisco MGX 8850 (PXM1E) Multiservice Switch Release 3 Documentation
Title Description
Cisco MGX 8850 (PXM45 and PXM1E) Hardware
Installation Guide, Release
3
DOC-7814250=
Describes how to install the Cisco MGX 8850 routing switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX
8850 switch uses either a PXM45 or a PXM1E
controller card and provides support for both broadband and
narrowband service modules.
Cisco MGX 8850 (PXM1E) and MGX 8830 Software
Configuration Guide, Release 3
DOC-7814248=
Describes how to configure the Cisco MGX 8850 (PXM1E) and the
Cisco MGX 8830 switches with PXM1E controller cards to operate
as ATM edge switches. This guide also provides some operation and
maintenance procedures.
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E),
and MGX 8950 Command Reference, Release 3
DOC-7814789=
Describes the PXM commands that are available on the CLI of the
Cisco MGX 8830, Cisco MGX
8850, and Cisco MGX 8950
switches.
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Cisco Frame Relay Software Configuration Guide and
Command Reference for MGX Switches (PXM1E)
DOC-7814255=
Provides software configuration procedures for provisioning
connections and managing the FRSM cards supported in this
release. Also provides command descriptions for all FRSM
commands.