Filter
Top Products
CAMA/E911 Installation
Issue 10 June 2005 119
Figure 47: CAMA Trunk Group form (page 1)
2. On the Trunk Group screen (page 1), in the Group Type: field, enter cama.
3. In the Group Name: field, enter the desired name.
4. In the TAC: field, enter the desired trunk access code.
5. In the Outgoing Display: field, enter y.
6. In the CESID I Digits Sent: field, enter the number directed by the Central Office (CO)
or the Public Safety Answering Point (PSAP).
7. Scroll to page 3 of the form.
Figure 48: Administrable Timers form (page 3)
8. On the Administrable Timers screen (page 3), you may need to adjust these fields
according to your CO. Scroll to page 5.
Page 1 of 11
TRUNK GROUP
Group Number: 1 Group Type: cama CDR Reports: y
Group Name: cama Trunk Group - E911 COR: 1 TN: 1 TAC: 701
Direction: outgoing Outgoing Display? y CESID I Digits Sent: 0
Busy Threshold: 99
TRUNK PARAMETERS
Trunk Type: wink-start
Outgoing Dial Type: r1mf
Trunk Termination: rc
Page 3 of 11
TRUNK GROUP
ADMINISTRABLE TIMERS
Outgoing Disconnect (msec): 400
Cama Outgoing Dial Guard (msec): 75
Outgoing Glare Guard (msec): 1000
Cama Wink Start Time (msec): 5000
Outgoing End of Dial (sec): 1 Outgoing Seizure Response (sec): 4
Disconnect Signal Error (sec): 30