Filter
Top Products
Install terminal server
Issue 10 June 2005 305
Rebooting the IOLAN+
You must reboot the server any time you change an IP address or Local Port value.
1. Press ENTER to view the Administration Menu.
Note:
Note: The following steps re-initialize the IOLAN+ so it knows it’s connected to the LAN
through its IP address.
2. Select reboot and press ENTER.
3. Press the space bar to restart the IOLAN+.
Administering the gateway
Note:
Note: If the C-LAN circuit pack and IOLAN+ are in the same subnet, skip this step.
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press ENTER.
3. Select gateway to access the Gateway menu
** Administrator ** ADMINISTRATION MENU Terminal: 2
access Remote System Access (PPP).
change Change login and/or admin password.
gateway Examine/modify gateway table.
host Examine/modify host table.
kill Kill TCP connections on serial line.
line Terminal configuration organised by line.
port Terminal configuration organised by port.
quit Return to connections menu.
reboot Reboot Server.
server Examine/modify Server parameters.
stats Examine Server statistics.
trap Examine/modify SNMP Trap parameters.
Port [2 ]
________________________________________________________________________________
IOLAN PLUS v4.02.00 a CDi iolan