Filter
Top Products
Activate and Administer the System
Issue 10 June 2005 81
Note:
Note: Alarms appear in the Alarm Log when power is applied to the system before all
equipment connecting to port circuit packs is installed. Some alarms are logged
when power is applied, but resolve quickly. If no equipment is connected to the
port circuit packs, alarms associated with these ports can take up to 4 hours to
log, but clear automatically after all equipment is installed and operating correctly.
Change Craft Password
The password for the craft login must be changed by the installing technician to prevent
unauthorized administration changes.
!
CAUTION:
CAUTION: After the password is changed, the new password must be safeguarded so no
unauthorized administration changes can be made. This password MUST NOT
BE REVEALED to the customer or to any unauthorized person.
To change the craft password:
1. Login as craft using the default password.
2. Type change password craft and press Enter. See Figure 29
. The cursor is positioned on
Password for Login Making Change:
Figure 29: Typical Change Password Screen
3. Type the default password for the craft login and press Enter.
4. Enter the new password. Valid passwords consist of a combination of 4 to 11 alpha or
numeric characters. Use at least 1 letter and 1 number.
5. In the Reenter Login’s Password: field, type the new password again and press
Enter.
change password craft Page 1 of 1
PASSWORD ADMINISTRATION
Password of Login Making Change:
LOGIN BEING CHANGED
Login Name: craft
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password: