Filter
Top Products
Installing and Cabling the Cabinets
126 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Figure 55: Class of Restriction form (page 1)
36. On the Class of Restriction screen (page 1), in the Calling Party Restriction: field,
type none and press Enter.
37. Type Save Translation and press Enter.
Install the BRI Terminating Resistor
The resistors balance the cable plant between the receiver and the transmitter on the interface.
When using the TN2198 ISDN-BRI 2-Wire U Interface circuit pack, an NT1 is required. A
terminating resistor is always required near the terminal when the BRI S-type interface circuit
pack (TN556D BRI 4-Wire S-NT Line circuit pack) is used (see #5ESS Switch Integrated
Services Digital Network Customer Premises Planning Guide, 533-700-100).
The resistor is built into the NT1 and can be 1 of 3 values, depending on the configuration and
the distance from the NT1 to the ISDN terminal. The resistor value is controlled from the NT1. A
terminating resistor adapter may be needed near the terminal and can be placed in the satellite
closet or work location.
Page 1 of 3
CLASS OF RESTRICTION
COR Number: 10
COR Description: supervisor
FRL: 0 APLT? y
Can Be Service Observed? n Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Time of Day Chart: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: none Facility Access Trunk Test? n
Restricted Call List? n Can Change Coverage? n
Unrestricted Call List?
Access to MCT? y Fully Restricted Service? n
Category For MFC ANI: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n_ Add/Remove Agent Skills? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Automatic Charge Display? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n