Filter
Top Products
Add Integrated Announcements/TN2501AP
Issue 10 June 2005 261
Backplane Adapter
Figure 85 shows the Backplane Adapter.
Figure 85: Backplane Adapter (Comcode 848525887)
LAN cable
The TN2501AP circuit pack does not include cables to connect the circuit pack to your LAN.
The following table lists the cable category and connection port.
Figure notes:
1. Amphenol connector attaches to the
back of the switch cabinet,
corresponding to the TN2501AP
circuit pack slot.
2. RJ-45 LAN cable connection
- 10 Mbps uses Category 3 cable.
- 100 Mbps uses Category 5 cable.
3. This connector is not used for VAL.
addfipm2 KLC 083000
1
2
3
Ethernet connection
speed
Cable Connection description
10 Mbps Category 3 Connects through the RJ45
jack (note #2 in Figure 85
),
100 Mbps Category 5 Connects through the RJ45
jack (note #2 in Figure 85
),