Filter
Top Products
Upgrade Firmware on Programmable Circuit Packs
Issue 10 June 2005 237
Get circuit pack information
To get circuit pack information:
1. Type list configuration all and press Enter to access the System Configuration screen.
2. Look for the target circuit pack(s). If the suffix in the Code field does not have a “P” (e.g.,
TN2302AP), a firmware download is not possible.
3. Look for the firmware vintage(s) in the Vintage field of the target circuit pack(s) to see if a
firmware download is needed.
4. Record the UUCSS address in the Board Number field of each source and target circuit
pack.
If a C-LAN is the source, make sure port 17 is assigned on that C-LAN. If it is not assigned,
administer the port.
5. Type add data-module UUC17 and press Enter.
For a self download to a VAL board, make sure that port 33 is assigned on the VAL board. If
it is not assigned, administer the port.
6. Type add data-module UUC33 and press Enter.
list configuration all
SYSTEM CONFIGURATION
Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti p=psa
01A08 IP MEDIA PROCESSOR TN2302AP HW03 FW044 01 02 03 04 05 06 07 08
01A04 CONTROL-LAN TN799DP HW00 FW005 u u u u u u u u
u u u u u u u u
17
01B04 DS1 Interface TN464HP HW02 FW006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 26 24
u u u u u u u u
01B05 DS1 Interface TN464GP HW02 FW006 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
u u u u u u u u
u u u u u u u u
01B06 DS1 Interface TN464F 000038 01 02 03 04 05 u u u
u u u u u u u u
u u u u u u u u
u u u u u u u u
01A10 VAL-ANNOUNCEMENT TN2501AP HW01 FW004 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 26 24
25 26 27 28 29 30 31 32
33