Filter
Top Products
Upgrade Firmware on Programmable Circuit Packs
Issue 10 June 2005 235
Verify hardware/software requirements
Make sure you know which download procedure to use and that you have all the hardware and
software that is necessary to proceed.
● Given the type of target circuit pack to be upgraded, choose an appropriate source circuit
pack from the following table (Table 53: Download Method by Circuit Pack
on page 235).
The last column indicates which download method must be used with the target and
chosen source.
● Make sure you have the following:
● Superuser or services login and password to the Avaya Communication Manager
● PC or other server with the following:
- IP connectivity to the source board
- Web browser (Internet Explorer 5.0 or higher or Netscape 4.x)
- IP connectivity to the World Wide Web
- File transfer protocol (FTP) software program
Table 53: Download Method by Circuit Pack
Target Circuit Pack(s) Source Circuit Pack Download
Method
TN464GP/HP, TN2464BP/CP,
and TN2313AP (UDS1)
TN799C or TN799DP C-LAN-distributed
TN2214CP or TN2224CP
(DIG-LINE)
TN799C or TN799DP C-LAN-distributed
TN771DP (Maintenance/Test) TN799C or TN799DP C-LAN-distributed
TN2302AP (IP Media
Processor)
1
1. For TN2302AP circuit packs with a vintage less than 22, a different download procedure
is required that is not described here. Go to the Avaya Support Web site under
Software & Firmware Downloads, DEFINITY ECS, TN2302AP firmware downloads.
On the page titled “Retired - (OLD Do Not Use) DEFINITY Firmware Downloads”, scroll
down to the TN2302AP section and click on
TFTP_Firmware_download_procedure.pdf.
TN799C or TN799DP C-LAN-distributed
TN799DP (C-LAN) TN799DP Self
TN2501AP (VAL) TN2501AP Self