Filter
Top Products
Upgrading R9csi/R10csi/Communication Manager 1.x/2.x to Avaya Communication Manager 2.2 on an
220 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Check link status
To check link status:
1. Enter display communication-interface links and press RETURN.
2. Note all administered links.
3. Type status link number and press RETURN for each administered link.
Check the following fields for the values listed:
● Link Status = connected
● Service State = in service
Note:
Note: For Release 7 and later, the only way to determine if an ISDN-PRI D-Channel is
up is to type status signaling group and press RETURN.
4. If any of the links are not up, take the necessary corrective action to restore the link before
continuing with the upgrade.
Save translations
To save translations:
1. Type save translation and press RETURN to write all translations from memory to the
translation flashcard (about 10 minutes).
2. Ensure that the save translation command was successful (error code must be zero). If the
value is anything else, the translations were not copied to the flashcard. If the translations
are corrupted, the following error message appears when logging in:
!
WARNING:
WARNING: Translation corruption detected; call an Avaya distributor immediately.
Note:
Note: The save translation command does not run if the translations are corrupt or do
not match (duplicated systems only).