Filter
Top Products
Connect printers
Issue 10 June 2005 323
Note:
Note: When you move ESM circuit packs, you MUST remove the DS1 and signaling
group translations. You cannot use the change circuit pack command.
Refer to Expansion services module
on page 320 for further information.
Connect printers
This section provides information on connecting and configuring printers that work with your
system and Avaya™ Communication Manager.
Connecting printers using TCP/IP
Printers can be connected to the switch using asynchronous TCP/IP links and a terminal server.
This section provides information on connecting adjuncts to the C-LAN and providing the initial
administration.
Task list
Whether you use an end-to-end TCP/IP configuration, a terminal server or a PC running RSP,
you must complete the following tasks:
● Administering IP node names on page 309.
● Administering IP services on page 309.
● Administering adjunct parameters on page 323.
● If you are using a terminal server, also complete Installing and administering the terminal
server on page 297.
● If you are using a PC with the Downloadable RSP Tool, complete Using the downloadable
reliable session-layer protocol (RSP) tool on page 324.
Administering adjunct parameters
You must administer adjunct parameters to let the system know that the adjunct is connected
through TCP/IP.
PMS journal and PMS log printers
See Guestworks® and DEFINITY® Systems Technician Handbook for Hospitality Installations,
555-231-743.