Filter
Top Products
Adding or Removing Hardware
324 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
System printer
1. Type change system-parameters features and press RETURN.
The Feature-Related System Parameters screen appears.
2. Move to Page 4.
3. In the System Printer Endpoint field, type SYS_PRNT.
4. Press ENTER to save your changes.
Testing the switch-to-adjunct link
You can use the test, status, busyout and release commands to find and correct problems with
a system printer, PMS log printer, or PMS journal printer. For more information about these
commands, see the Maintenance manual for your switch.
If a link does not come up immediately, try using the busyout (journal-link pms-log and
wakeup-log, and sp-link) and release (journal-link pms-log and wakeup-log, and sp-link)
commands.
Note:
Note: Status sp-link can show a system printer link as down, when it is actually properly
connected. If no data is being transmitted, the switch may not see this link as
active.
Using the downloadable reliable session-layer
protocol (RSP) tool
The intent of the Reliable Session-Layer Protocol (RSP) is to guarantee delivery of data records
from the switch to an output device that connects to the switch over an asynchronous TCP/IP
link. The Downloadable RDTT tool allows you to implement this protocol on a PC that collects
data records in a file. The protocol assures that the data records arrive safely at the PC. You
can then send the output file to a printer. See Install Reliable Data Transport Tool (RDTT)
Package on page 314.