Filter
Top Products
Adding or Removing Hardware
240 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Table 54: Firmware Download fields and descriptions
Field Description Notes
Source
Board’s
Location
Type the UUCSS address of the
source circuit pack.
For a self download, the same
board is the source board and
target board.
For a C-LAN-distributed
download, this is the source
C-LAN location.
Firmware
Image File
Name
Type the complete filename of the
new firmware image file. If the list
directory board command showed
that the file had an extension, such
as.bin, include the extension as well.
Target Board
Code
Type the circuit pack ID, for example
“TN2501.”
Do not type the suffix, such as “AP”,
“DP”, or “GP”.
Enter the TN code of the target
circuit pack(s).
For a self download, this is the
same as for the source circuit
pack.
Suffix Examples:
● For VAL (TN2501AP), type AP.
● For C-LAN (TN799DP), type
DP.
● For DS1 (TN464GP/HP), type
HP.
Firmware
Vintage
This is blank. It shows a value in the
Firmware Download form of a display
firmware download or a status
firmware download.
Schedule
Download
Type y to schedule the firmware
download for another time.
Type n to start the firmware download
immediately after completing the form.
Once the firmware download
begins, you cannot make any
changes to this form. You can
only disable this schedule using
disable firmware download and
then start a new one. (See
Aborting a firmware download
on
page 246 for instructions.)
If you answer n(o), then the
Start Date/Time and Stop
Date/Time fields disappear. The
download begins as soon as you
press Enter.
1 of 2