Filter
Top Products
Chapter 3 General Management of the Switch 3-77
FIGURE 3-24 The Switch Config ⇒ Spanning Tree ⇒ Advanced Configuration Window
Note – If you receive an error saying that the data you have entered is invalid,
check that you have specified a transmission limit within the specified range.
Command-line Interface: Configuring Advanced STA Settings
This example sets the spanning tree path cost method and transmission limit.
MIB variables Associated With Advanced STA Settings
Console(config)#spanning-tree pathcost method long
Console(config)#spanning-tree transmission-limit 4
Console(config)#
TABLE 3-20 MIB Variables Associated With Advanced STA Settings
Field Name MIB Variable Access Value Range Default Value
RSTP Path Cost
Method
sun...
staMgt.
staPathCostMethod
Read/write short (1),
long (2)
long
RSTP
Transmission
Hold Count
sun..
staMgt.
staTxHoldCount
Read/write Integer (1-10) 3