Sunfire B1600 Switch User Manual


 
3-22 Sun Fire B1600 Blade System Chassis Switch Administration Guide June 2003
FIGURE 3-8 The Switch Status Software Window (for downloading firmware)
Note If you receive an error message saying that the data you have entered is
invalid, you might have typed an incorrect IP address or an incorrect file name, or
you not might have the correct access permissions for TFTP transfer. Alternatively, it
is possible that there is not enough memory available on the switch.
If you download to a new destination file, select the new file from the pull-down
menu for the operation code used at startup and click Save. To start the new
firmware, reboot the system by clicking Save and Restart.
FIGURE 3-9 The Switch Status Software Window (at the End of the Download Process)
Command-line Interface: Dowloading Switch Firmware
1. Type the IP address of the TFTP server.
2. Select config or opcode file type.