Filter
Top Products
Chapter 4 Command-Line Reference 4-131
Example
The following example shows how to display information for VLAN 1:
4.3.13 GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange
VLAN information in order to automatically register VLAN members on interfaces
across the network. This section describes how to enable GVRP for individual
interfaces and globally for the switch, as well as how to display default
configuration settings for the Bridge Extension MIB.
Console#show vlan id 1
VLAN Type Name Status Ports/Channel groups
---- ------- ---------------- --------- ----------------------
1 Static DefaultVlan Active SNP0 SNP1 SNP2 SNP3 SNP4
SNP5 SNP6 SNP7 SNP8 SNP9
SNP10 SNP11 SNP12 SNP13 SNP14
SNP15 NETP0 NETP1 NETP2 NETP3
NETP4 NETP5 NETP6 NETP7
2 Static MgtVlan Active NETMGT
Console#
TABLE 4-18 GVRP and Bridge Extension Commands
Command Function Mode Page
Interface Commands
switchport gvrp Enables GVRP for an interface IC 4-132
switchport
forbidden
vlan
Configures forbidden VLANs for an interface IC 4-129
show gvrp
configuration
Displays GVRP configuration for selected interface NE,
PE
4-132
garp timer Sets the GARP timer for the selected function IC 4-133
show garp timer Shows the GARP timer for the selected function NE,
PE
4-135
Global Commands
bridge-ext gvrp Enables GVRP globally for the switch GC 4-135
show bridge-ext Shows bridge extension configuration PE 4-136