Filter
Top Products
4-148 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The switch must use IGMPv2 for this command to take effect.
Example
The following shows how to configure the timeout to 500 seconds:
Related Commands
ip igmp snooping version (4-141)
4.3.14.11 ip igmp snooping vlan mrouter
Use this command to statically configure a multicast router port. Use the no form to
remove the configuration.
Syntax
ip igmp snooping vlan vlan-id mrouter interface
no ip igmp snooping vlan vlan-id mrouter interface
■ vlan-id – VLAN ID (Range: 1-4094)
■ interface
ethernet port-name
port-name – down link: SNP0-15; up link: NETP0-7; mgt: NETMGT
port-channel channel-id (Range: 1-6)
Console(config)#ip igmp snooping router-port-expire-time 500
Console(config)#