Filter
Top Products
Chapter 3 General Management of the Switch 3-155
3.5.3.2 Command-line Interface: Viewing SNMP Statistics
This example shows SNMP statistics for the switch.
Console#show snmp
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
1. private, and the privilege is read/write
2. public, and the privilege is read-only
11 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
8 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
1 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
3 Set-request PDUs
11 SNMP packets output
0 Too big errors
0 No such name errors
0 Bad values errors
2 General errors
3 Response PDUs
0 Trap PDUs
SNMP logging: disabled
Console#