Chapter 4 Command-Line Reference 4-25
Example
The following example shows how to display all file information:
4.3.2.4 whichboot
Use this command to display which files were booted when the system powered up.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See TABLE 4-5 on for a description of the file information displayed by this
command.
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -------
diag_0060 Boot-Rom image Y 111360
run_01642 Operation Code N 1074304
run_0200 Operation Code Y 1083008
Factory_Default_Config.cfg Config File N 2574
startup Config File Y 2710
--------------------------------------------------------------
Total free space: 0
Console#