Sunfire B1600 Switch User Manual


 
Glossary-2 Sun Fire B1600 Blade System Chassis Switch Administration Guide April 2003
Dynamic Host Control
Protocol (DHCP) Provides a framework for passing configuration information to hosts on a
TCP/IP network. DHCP is based on the Bootstrap Protocol (BOOTP), adding
the capability of automatic allocation of reusable network addresses and
additional configuration options.
End Station A workstation, server, or other device that does not act as a network
interconnection.
Ethernet A network communication system developed and standardized by DEC, Intel,
and Xerox, using baseband transmission, CSMA/CD access, logical bus
topology, and coaxial cable. The successor IEEE 802.3 standard provides for
integration into the OSI model and extends the physical layer and media with
repeaters and implementations that operate on fiber, thin coax and twisted-pair
cable.
Fast Ethernet A 100 Mbit/sec network communication system based on Ethernet and the
CSMA/CD access method.
Full Duplex Transmission method that allows switch and network card to transmit and
receive concurrently, effectively doubling the bandwidth of that link.
GARP VLAN
Registration Protocol
(GVRP) Defines a way for switches to exchange VLAN information in order to register
necessary VLAN members on ports along the Spanning Tree so that VLANs
defined in each switch can work automatically over a Spanning Tree network.
Generic Attribute
Registration Protocol
(GARP) GARP is a protocol that can be used by end stations and switches to register
and propagate multicast group membership information in a switched
environment so that multicast data frames are propagated only to those parts
of a switched LAN containing registered end stations. Formerly called Group
Address Registration Protocol.
Gigabit Ethernet A 1000 Mbit/sec network communication system based on Ethernet and the
CSMA/CD access method.
Group Attribute
Registration Protocol See Generic Attribute Registration Protocol.
IEEE 802.1D Specifies a general method for the operation of MAC bridges, including the
Spanning Tree Protocol.
IEEE 802.1Q VLAN Tagging—Defines Ethernet frame tags which carry VLAN information.
It allows switches to assign end stations to different virtual LANs, and defines
a standard way for VLANs to communicate across switched networks.
IEEE 802.1p An IEEE standard for providing quality of service (QoS) in Ethernet networks.
The standard uses packet tags that define up to eight traffic classes and allows
switches to transmit packets based on the tagged priority value.