Sunfire B1600 Switch User Manual


 
3-132 Sun Fire B1600 Blade System Chassis Switch Administration Guide June 2003
MIB Variables for Configuring a Port’s STA Settings
3.4.6.3 Checking the STA Protocol Status for Interfaces
If at any time the switch detects STP BPDUs, including Configuration or Topology
Change Notification BPDUs, it automatically sets the selected interface to forced
STP-compatible mode. However, you can also use the Protocol Migration button to
manually re-check the appropriate BPDU format (RSTP or STP-compatible) to send
on the selected interfaces.
Web Interface: Checking the STA Protocol Status for Interfaces
1. Open Up Links / Down Links Spanning Tree Spanning Tree Protocol.
2. Select the required interfaces.
3. Click Protocol Migration.
TABLE 3-39 MIB Variables for Configuring a Port’s STA Settings
Field Name MIB Variable Access Value Range
Default
Value
STA Port
Priority
sun...mstMgt.
mstInstancePortTable.
mstInstancePortEntry.
mstInstancePortPriority
Read/write Integer (0-240) 128
STA PortPath
Cost
sun...mstMgt.
mstInstancePortTable.
mstInstancePortEntry.
mstInstancePortPathCost
Read/write Integer
(long:
1-200,000,000;
short: 1-65,535)
page
3-129
STA Port
Admin Link
Type
sun...staMgt.
staPortTable.
staPortEntry.
staPortAdmin-
PointToPoint
Read/write forceTrue (0),
forceFalse (1),
auto (2)
auto
STA Port
Admin Edge
Port
sun...staMgt.
staPortTable.
staPortEntry.
staPortAdminEdgePort
Read/write true (1),
false (2)
false